Crevalle Boats 33 CSF, Owner'S Manual

Page: 105 / 188

105
Exterior Equipment
11.6 Helm Seats & Tackle Prep Station
Helm Seats
The helm seats are equipped with a flip up bolster
to provide more room between the seats and the
helm. The bolster converts the seat to a leaning
post style seat with a backrest, allowing the op-
erator and passenger to sit or stand at the helm.
To convert each seat to a leaning post, lift the
front of the seat cushion to raise the bolster and
push it back above the seat cushion. A molded
in footrest on the rear of the console makes the
helm more comfortable when the bolsters are set
to the seat position.
The seat bases are equipped with slide tracks
that allow the seats to move fore and aft. Press
the slide lock lever located at the starboard front
side of the seat base to release the slide track and
adjust the seat to the desired position. Release
the lever to lock the seat in position.
Arm rests on each side provide a more comfortable
driving position and swing up into the backrest
cushion to make it easier to enter and exit the
helm area. There are also folding center arm rests
with cup holders between the seats.
Helm Seats with Bolsters Up
The battery compartment, battery switch panel
and two storage compartments are located behind
hinged doors on the forward side of the helm seat
base. The doors are secured with one or two twist
lock latches, depending on the door size. Always
make sure the doors are closed and latched before
operating the boat.
Helm Seat Slide Track Lock Release Lever