manualshive.com logo in svg

Crestron UPX-2, Operation Manual

Share
Download
Crestron UPX-2 Operation Manual Download Page 89

Universal Presentation Processor  

Crestron 

UPX-2

 

“Open” Window 

 

4.  To enter a new IP ID, select the hexadecimal IP ID of the control system 

from the 

IP ID 

list. The IP ID of the control system must match the IP ID 

that is specified to the control system in the SIMPL Windows program.  

“IP Table Entry” Window 

 

NOTE

:  All IP table entries are set as Master and cannot be changed. 

5. In 

the 

IP Address/Hostname 

field, enter the static IP address of the control 

system, or if the control system is DHCP-enabled, its fully qualified domain 
name. After entering all of the information, click 

OK 

to add the entry to the 

IP table.  

6.  Repeat this procedure for all of the control systems that will control the  

UPX-2.  

7. Click 

Save To File… 

on the “IP Table” window

 

to save this IP table to the 

PC. 

Operations Guide – DOC. 6276B 

  Universal Presentation Processor: UPX-2 

¥

 67 

Summary of Contents for UPX-2



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands