Crestron UPX-2 Operation Manual Download Page 68

Page: 68 / 114

Crestron

UPX-2

Universal Presentation Processor

2. Enter the user name, initials, organization and the product key found on the

Microsoft Office CD that is included with the UPX-2-MSO.

3. Click

to complete the activation.

ETHERNET Details

The ETHERNET MENU allows configuration of the UPX-2’s settings for Ethernet
communications.

Ethernet

Press the

Ethernet

button to access the “Ethernet Setup” window. Changes are made

in real time and there is typically no need to reboot. The Ethernet address and mask
are displayed on this screen.

“Ethernet Setup” Window

Click

TCP/IP Setup

to open the “EthernetExternal Properties” window. This

window displays the connection and related required items.

Universal Presentation Processor: UPX-2

Operations Guide – DOC. 6276B

Summary of Contents for UPX-2



















































































































Search results

Summary of Contents for UPX-2

Reviews:

Brands by name

Popular brands

Crestron UPX-2, Operation Manual

Search results

Summary of Contents for UPX-2

Reviews:

Brands by name

Popular brands