Supplemental Guide – DOC. 8413A
UC-PHONE-T & UC-PHONE-T-PLUS
•
23
•
Select the transmission method of the PC port from the PC Port Link drop-down
list.
Web Server
The Web Server section configures the phone’s web server functions.
•
HTTP: Set to ON to enable an http connection to the phone. Set to OFF to
disable an http connection to the phone.
•
HTTP Port (1~65535): Enter the port number the phone uses for http
communications.
•
HTTPS: Set to ON to enable an https connection to the phone. Set to OFF to
disable an https connection to the phone.
•
HTTPS Port (1~65535): Enter the port number the phone uses for https
communications.
NOTE:
If HTTP and HTTPS are set to OFF, the web configuration tool is disabled
when the phone reboots. All configuration may be done through “Phone Settings” on
page 2.
802.1x
The 802.1x section enables and configures the phone to use 802.1x. authentication.
Select the authentication mode from the 802.1x Mode drop-down list.
•
EAP None: When selected, authentication protocols are not used.
•
EAP-MD5: When selected, MD5 authentication is used. MD5 is the base security
requirement in the EAP standard and uses username and password as the
authentication credentials. Enter the identity and password in the Identity and
MD5 Password fields.
•
EAP-TLS: When selected, TLS authentication is used.
a.
Enter the identity and password in the Identity and MD5 Password fields.
b.
Upload a CA certificate and/or a device certificate. To upload a CA
certificate, click inside the CA Certificates field, select a certificate file, and
click Upload. To upload a device certificate, click inside the Device
Certificates field, select a certificate file, and click Upload.
•
EAP-PEAP/MSCHAPv2: When selected, PEAP/MSCHAPv2 authentication is
used.
a.
Enter the identity and password in the Identity and MD5 Password fields.
b.
Upload a CA certificate. To upload a CA certificate, click inside the CA
Certificates field, select a certificate file, and click Upload.
•
EAP-TTLS/EAP-MSCHAPv2: When selected, PEAP/MSCHAPv2 authentication is
used.
a.
Enter the identity and password in the Identity and MD5 Password fields.
