14
•
UC-PHONE-T & UC-PHONE-T-PLUS
Supplemental Guide – DOC. 8413A
Enter the admin password (default password = “admin”) and tap Enter. The debug
settings are displayed on the right side of the screen.
Debug
Logging Settings
Logs are used for troubleshooting the phone. The Logging settings section enables and
disables the logging function and configures the level of detail provided in logs created
by the phone. To configure the phone's logging settings:
1.
Move the Log enable switch to the right to enable logging. When the switch is
moved to the left, logging is disabled.
2.
Tap Log level, and then touch and drag up or down to scroll through the list of
available methods.
3.
Tap the log level to select it, and then tap OK. Otherwise, click CANCEL to
cancel.
Reset
The Reset section allows you to reset phone settings to the factory default settings.
Reset User Settings
Use this function to reset user settings to the factory configuration.
1.
Tap Reset user settings.
2.
Tap OK to continue or CANCEL to cancel.
Reset to Factory Settings
Use this function to reset user and phone settings to the factory configuration.
1.
Tap Reset to Factory Settings.
