Crestron UC-PHONE-T Supplemental Manual Download Page 35

Page: 35 / 62

Supplemental Guide – DOC. 8413A

UC-PHONE-T & UC-PHONE-T-PLUS

•

Adjust the following settings as necessary.

•

DHCP Active: To have the phone obtain the provisioning server address by

detecting DHCP options, set DHCP Active to ON. Otherwise, set to OFF.

•

Custom Option: Configures the custom DHCP option for requesting a

provisioning server address. Values must be integers from 128 to 254. Multiple

DHCP options are separated by commas.

NOTE:

DHCP Active must be set to ON.

•

DHCP Option Value: Configures the value (vendor name of the device) of DHCP

option 60.

•

Server URL: If static addressing is used, enter the access URL of the provisioning

server.

•

Username: Enter the user name for accessing the provisioning server. Maximum

length is 32 characters.

•

Password: Enter the password for accessing the provisioning server. Maximum

length is 32 characters.

•

Attempt Expired Time(s): Configures the time (in seconds) to wait after a file

transfer fails before retrying the transfer via auto provisioning. Integer values

from 1 to 300 are allowed.

•

Common AES Key: Configures the plaintext AES key for decrypting the Common

CFG file.

•

MAC-Oriented AES Key: configures the plaintext AES key for decrypting the

MAC-Oriented CFG file.

•

Power On: Configures whether the phone should perform auto provisioning when

powered on. If set to ON, auto provisioning will be performed when the phone

turns on. If set OFF, auto provisioning will not be performed when the phone

turns on.

•

Repeatedly: Set to ON to turn on the repeat auto provisioning feature. Set to

OFF to turn off the repeat auto provisioning feature.

•

Interval (Minutes): Configures the interval (in minutes) for the phone to perform

the auto provisioning repeatedly. Integer values from 1 to 43200 are allowed

NOTE:

Repeatedly must be set to ON.

•

Weekly: Set to ON to turn on the weekly auto provisioning feature on a weekly

basis. Set to OFF to turn off the weekly auto provisioning feature.

•

Time: Configures the begin time and end time (hour and minute) of the day when

the phone should perform the weekly auto provisioning process

NOTE:

Weekly must be set to ON.

Summary of Contents for UC-PHONE-T































































Search results

Summary of Contents for UC-PHONE-T

Reviews:

Related manuals for UC-PHONE-T

Brands by name

Popular brands

Crestron UC-PHONE-T, Supplemental Manual

Search results

Summary of Contents for UC-PHONE-T

Reviews:

Related manuals for UC-PHONE-T

Brands by name

Popular brands