2-Series Professional Media Controller with RF
Crestron
MC2W
all symbols and/or modules that use NVRAM at the beginning of your program.
When NVRAM (.nvr file) is re-installed, all the values should line up with the
program. If the program is modified, and logic is placed before any symbols using
NVRAM, the previously stored values will not line up and your presets will have to
be re-entered
Volatile (SDRAM)
1. Digital, analog and serial signal values
2. SIMPL+ Variables (if "volatile" qualifier is used, or
#DEFAULT_VOLATILE is used)
DRAM is used by the operating system for dynamic storage of variables, signals and
other constructs used at runtime. The actual amount of DRAM used at any given
time depends on the particular program that is running, i.e., usage is variable, or
dynamic, during normal operation.
NOTE:
SDRAM is internal to operations and is not available to the programmer.
Industry Compliance
As of the date of manufacture, the MC2W has been tested and found to comply with
specifications for CE marking and standards per EMC and Radiocommunications
Compliance Labelling (N11785).
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. The equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
10
•
2-Series Professional Media Controller with RF: MC2W
Operations Guide - DOC. 6143
