Crestron
MC2W
2-Series Professional Media Controller with RF
-
Press and hold the
SW-R
button for approximately three to
five seconds. The Viewport console should display the
following message:
Viewport Message
MC2W>
Control Console
Changing to default Comm Specs. 115200 N81 RTS/CTS
Switch to new settings….
Bypassing Program Load!!!
- Release
the
SW-R
button.
d. If communication still cannot be established:
-
Remove power from the control system.
-
Press and hold the
SW-R
button on the front panel of the
MC2W.
-
Reapply power to the control system.
-
The Viewport console should display the message shown
above.
- Release
the
SW-R
button.
e. Select
Set Baud Rate
on the Viewport
Functions
menu (or press
F8
) and choose any baud rate from the drop-down list. This will
attempt to establish a connection at the indicated baud rate. If the
connection is successful, both the PC and the control system will
be set to the new baud rate.
f. Reinitialize the unit by recycling the power or pressing the
HW-R
button. If the connection is established, the Viewport console
should display some text and the
MC2W>
prompt.
g. If communication still cannot be established, contact Crestron
customer service.
Compiling and Uploading a Program to the Control
System
After you have completed your SIMPL Windows program using an MC2W, you
must compile and upload the program to the control system.
To compile the program, simply click the
Convert/Compile
button
on the
SIMPL Windows toolbar, or select
Project | Convert/Compile
(you can also press
F12
). A status bar indicates the progress of the compile operation. After the
operation is complete, a window displays information about the program such as the
number and type of signals, and memory usage.
The compiled program is stored as an SPZ file in the same directory as the source
file. There are a number of ways to upload an SPZ file to the control system.
1. Immediately after compiling the program you have the option to transfer
the file to the control system.
Operations Guide - DOC. 6143
2-Series Professional Media Controller with RF: MC2W
•
17
