Crestron
e-control Vote SW-VOTE
119
••
Appendices
Installation & Reference Guide — DOC. 5822
StatePrintSave
Voting Console
Description
Vote is being recorded
Direction
Voting Computer to control system
Type
Digital
Value
Assert:
Results now being recorded on Voting Computer
([
Print &
]
Save Results
button feedback ON)
De-assert:
Results have been recorded
([
Print &
]
Save Results
button feedback OFF)
Expected Reply
To an assert:
None
To a de-assert:
None
Comments
Results are saved either
§
by user interaction with the Vote Proctor window on the Voting Computer:
[
Print &
]
Save Results
button (which is only enabled after a vote); or
§
when control system issues the
PrintSave
signal after a vote.
The signal is de-asserted when the Voting Computer finishes recording the vote
The de-assert is always followed by the following (in the order given):
§
All “state” signals are de-asserted
§
NewVote
pulse
§
All digital “tally” signals are de-asserted and analog “tally” signals are reset to 0
§
All
Change
s
signals are reset to either 0 (absent) or 1 (present)
§
Agenda scroller (if there is one) is requeried to eliminate the just-voted-upon item
(which may or may not cause signals to be sent to alter the display)
§
AgendaEcho
with the value “[Vote concluded]”
Used in conjunction with the other “state” signals,
StateStart, StateEnd,
and
StateDisplay
; and the pulsed signals,
NewVote
and
AgendaTrigger
. These
signals provide feedback to the control system about the voting sequence. They
can be used to highlight the sequence control buttons, or to enable/disable
touchpanel choices. (See “State Coordination,” page 61, for a “score sheet”
illustrating the sequence.)
See Also
PrintSave, AgendaEcho, NewVote
