© Copyright 2010, Creative Playthings
YORKTOWN
19794-300 Rev J (05-20)
Page 20
ASSEMBLY INSTRUCTIONS
Step 29 — Install Panel Frame:
Rest one of the Panel Frame assemblies on the top of an
End Panel, between the Corner Posts. Drill four 3/16" diam-
eter holes up through the top frame of the End Panel. Use
four #10 x 2-1/2" Screws to secure the Panel Frame assem-
bly to the End Panel.
Repeat with the End Panel at the other end of the gym.
Step 30 — Panel Board:
Place the Panel Board (U) against the assembly from the
previous step. Arrange it in such a way that the gap between
the boards looks the same as the gap between the boards
on the End Panel. Fasten using #8 x 1-5/8" Screws. Repeat
with the Panel at the other end of the gym.
Step 31 — Gable Filler:
Fasten the Gable Filler (S) inside the end roof rafters, snug
against the bottom of the Gable Fan as shown. Use four #8
x 1-5/8" Screws.
Repeat with the other Gable Filler at the other end of the
roof.
U
S
View from inside gym. Many
parts omitted for clarity.
