Crane 93941, User Manual

Page: 14 / 48

Workout
14
6. Push the Mode button until the display shows the desired calorie
consumption.
The calorie consumption is set in increments of 10.
Once you have set all desired workout goals, you can start your workout (see
chapter “Workout”). The computer 14 will count the preset values down to 0
and show them on the display. Once the workout goals have been reached, the
computer will stop counting for approx. 10 seconds and restart at 0.
Resetting the display
The display 10 is set to 0 before your first workout. With all following workouts,
the computer 14 will continue counting at the point where you stopped your
last workout.
You can reset the display to 0:
− Hold the Mode button 9 down until all symbols can be seen at the same time.
The duration of the workout (TMR), the number of steps (REPS) and the
calorie consumption (CAL) have been reset.
− Remove the battery and reinsert it (see chapter “Inserting and changing
the battery”) to reset the total number of workout steps (TTR).
Workout
CAUTION!
Risk of injury and health!
An incorrect or excessive workout can harm your health and
cause injury.
− Place the stepper on a flat, level and non-slip surface and
make sure it is stable.
− Always warm up before your workout.
− Wear anti-slip sneakers and comfortable sports clothing.
− Always perform controlled movements.
− Repeat the exercises depending on your physical fitness
and the intensity of your workout. Divide the exercises into
multiple sets and take a break between the individual sets.
− Be sure to drink enough during your workout.
− Do not overstrain yourself when working out. Breath in a
relaxed manner. Avoid fast, uncontrolled movements.
ZUR
FREIGABE
V7