background image

Pressing the sugar button again will revert to the default sugar selection.

7.

Once the required drink has been selected, press the Start button on the keypad.

Unless the customer has placed their own cup
into the dispense area, a cup will automatically
be ejected from the cup drop unit into the
dispense area and the drink selection will be
delivered into the cup. Whilst this operation is
in progress the LCD will display the screen
shown opposite.

8.

After the beverage has been dispensed the LCD
will display the message Thank You and the
machine will beep once before returning to
standby mode.

The drink can then be carefully removed from the dispense area.

9.

Certain drink selections do not allow the
strength option to be selected or milk added.
For example, if the customer presses the
Cappuccino selection button the LCD will
display the screen opposite. The customer can
either press the start button to vend the drink
or press the sugar button in order to add sugar to their taste as described above.

10. Other drink choices do not allow the strength

option or milk/sugar to be selected. For
example,

if the customer presses the

Chocolate selection button the LCD will
display the screen opposite.

The customer simply presses the start button and the machine will vend their
drink.

52

Technical Manual

Summary of Contents for Genesis

































































































































Reviews: