Crane Merchandising Systems Genesis, Technical Manual

Page: 29 / 128

To set a new maximum temperature press the
↵ ↵
(Enter) key.The LCD will display the screen
as shown. Enter the new temperature value, e.g.
press 0-8-5 using the drink selection keypad to
set a maximum temperature of 85°C.
Press the
↵ ↵
(Enter) key to return to the Heater Tank Set-Up menu screen and
verify that the new value is displayed in the status line.
N.B. The acceptable temperature values range from 75°C to 98°C unless a lower
value is set for the minimum vend temperature.
2. Minimum Vend Temperature: The machine
will suspend vending if the water in the heater
tank falls below a certain value. This value is
factory set to 75°C as displayed in the status
line at the bottom of the screen when
Minimum Vend Temperature is highlighted.
To set a new Minimum Vend Temperature press
the
↵ ↵
(Enter) key. The LCD will display the
screen as shown. Enter the new temperature
value, e.g. press 0-7-0 using the drink selection
keypad to set a minimum vend temperature of
70°C.
Press the
↵ ↵
(Enter) key to return to the Heater Tank Set-Up menu screen and
verify that the new value for the minimum vend temperature is displayed in the
status line.
2. Selection Timers: Genesis Instant and Freshbrew machines are supplied pre-
programmed with carefully tested default recipes for each drink selection.These recipes
will be suitable for most applications. Each selection can, however, be adjusted to
accommodate different ingredient types or operator/customer preference. These
recipes can be quickly and easily changed from within the Selection Timers menu.
1. From the Product Configuration menu, press the down (
▼
) key to highlight
Selection Timers then press the
↵ ↵
(Enter)
key to access the menu.The menu contains all
of the drink selections available from the
machine. Scroll down using the (
▼
) key to
highlight a selection and press the
↵ ↵
(Enter)
key to configure it.
27
Technical Manual