manualshive.com logo in svg

Crane Merchandising Systems Genesis, Technical Manual

Share
Download
Crane Merchandising Systems Genesis Technical Manual Download Page 25

Mug Sensor - Average: This menu gives the engineer an indication as to overall
efficiency of the SureVend™ sensor.

Highlight  Mug Sensor - Average from the
Switches & Sensors menu and press the 

↵

↵

(Enter) key.The LCD will display the screen as
shown. The value displayed represents the
average sensor calibration value.The range for
correct operation should be 51 - 254.

7.

Test Vend Without  Cups: This menu allows
the engineer to test vend a selection without
dropping a cup. Highlight Test Vend Without
Cups in the main Test menu and press the 

↵

↵

(Enter) key.The LCD will display the screen as
shown opposite.

Make a selection using the drink selection keypad and press the START button.
The machine will dispense the selection without dropping a cup.

N.B. Ensure that an empty cup is placed under the dispense position to receive
the vend.

Press the ‘X’ (Exit) key to return to the main test menu screen.

8.

Test Vend: This menu allows the engineer to
make a test vend in order to verify that the
dispensed vend is not to short or too long for
the type of cup loaded into the machine.
Highlight  Test Vend in the main Test menu
and press the 

↵

↵

(Enter) key. The LCD will

display the screen as shown opposite.

Make a selection using the drink selection keypad and press the START button.
The machine will drop a cup before dispensing the selection.

Press the ‘X’ (Exit) key to return to the main test menu screen.

9.

Display: Entry into this menu allows the engineer to test the LCD display screen.
Highlight Display in the Test menu and press the 

↵

↵

(Enter) key. Press the START

key repeatedly to cycle through the different test patterns.The test patterns will
reveal any flaw in the display.

Press the ‘X’ (Exit) key to return to the main test menu screen.

23

Technical Manual

Summary of Contents for Genesis

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands