manualshive.com logo in svg

Crane Merchandising Systems Genesis, Technical Manual

Share
Download
Crane Merchandising Systems Genesis Technical Manual Download Page 39

1.

From the Monetary menu press the down
(

▼

) key and highlight Credit For Failed Vend

and press the 

↵

↵

(Enter) key. Using the up (

▲

)

or down (

▼

) keys, select the desired option

(indicated by the filled radio button).

2.

Press the 

↵

↵

(Enter) key to save the selection and return to the Monetary menu.

Verify that the chosen option is displayed in the status line at the bottom of the
display when Credit For Failed Vend is highlighted.

10. Configure Card Revalue

N.B. This menu is only available when both an MDB card reader and coin mechanism
are fitted and configured from within the Card Reader menu.This is not available on
Genesis machines and is for information only.

To configure this value:

1.

From the Monetary menu press the down
(

▼

) key to highlight Card Revalue and press

the 

↵

↵

(Enter) key. Using the up (

▲

) or down

(

▼

) keys, select the desired revalue option

(indicated by the filled radio button).

2.

Press the 

↵

↵

(Enter) key to save the new option and return to the Monetary

menu.Verify that the chosen option is displayed in the status line at the bottom
of the display when Card Revalue is highlighted.

11. Configure Display Coin Set

The Display Coin Set menu enables the engineer to configure the coin set to suit the
coin/card mechanism or bill validator fitted to the machine. This ensures that the
message displayed in standby mode, correctly indicates to the customer which coins
(or card/key) may be entered.

The available coin sets are:

1.

1p to 20p

5.

5p to £1

9.

5c to 1

€

2.

1p to 50p

6.

5p to £2

10. 5c to 2

€

3.

1p to £1

7.

Card

11. 50c to 1

€

4.

5p to 50p

8.

Key

37

Technical Manual

Summary of Contents for Genesis

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands