Crane Merchandising Systems Genesis, Technical Manual

Page: 18 / 128

Section 4 - Engineers Program
To access the Engineers Program, enter the programming mode as described in section 3.
Once in the Engineers Program the LCD display on
the front of the machine will display the top level
programming menu screen - Main Menu.There are
nine top level menu items as shown opposite.
Using the up (
▲
) and down (
▼
) keys,
↵ ↵
(Enter) key
and ‘X’ (Exit) key on the drink selection keypad the
engineer can navigate quickly and easily through the
engineers program menus as described in section 3.
4.1 Data Recall Menu
Entry into this menu allows the engineer to view Non-Resettable and Resettable Sales
Data, view data relating to the number of Mug Vends
and (if feature enabled) view SureVend™ assisted
vend information. The Resettable Sales Data, Mug
Data and SureVend™ Data menus all contain an
extra menu which allows the engineer to delete the
current data from the machines memory.
1. Non Resettable Sales Data: This menu allows the engineer to view and record
monetary and sales values. This data cannot be reset and will remain intact for
the service life of the controller board.
1. From the Data Recall screen highlight Non
Resettable Sales Data and press the
↵ ↵
(Enter) key. The LCD will display the screen as
shown opposite. From this menu the engineer
can view data for the Overall Totals
(highlighted) or By Product.
2. To view the Overall Totals screen, press the
↵ ↵
(Enter) key on the drink selection keypad.
This menu displays both the total £ amount
and total vend counts for the following data:
●
Sales
●
Discount
●
Test Vend
●
Surcharge
●
Free Vend
16
Technical Manual