5
NOzzle USAGe
• Place the valve adaptor over the stem of the nozzle as indicated in the “Valve Adaptor“ section above.
• Place the needle nozzle or beach ball nozzle into the object to be inflated.
• When finished, remove the nozzle from the valve adaptor and store in the accessory storage compartment
.
MAINteNANce
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
iMpOrtant
:
To assure product SAFETY and RELIABILITY, repairs, maintenance, and adjustment
(other than those listed in this manual) should be performed by
a qualified service dealer or other
qualified service personnel
.
AcceSSORIeS
WARNING:
The use of any accessory not recommended for use with this tool could be hazardous.
Additional attachments and accessories for use with this tool are available at extra cost from your local
Sears store or Sears service center.
If you need assistance regarding accessories, please call:
1-877-795-2353
.
tROUBleSHOOtING
Problem
Possible cause
Possible Solution
• Attachment will not start. • Attachment is not secured.
• Make certain the attachment is fully pushed into
the Power Unit.
NOte:
Refer to Power Unit instruction manual for troubleshooting solutions regarding operation of the
Power Unit.
