C.D. I. INSPECTION
AC110V
IGNITION COIL INSPECTION
Check the primary coil for continuity.
Mark connections with an ohmmeter as
shown.
The coil is normal if there is continuity.
STANDARD: 0.1
∼
1.0
Ω
( 20
℃
)
Check the secondary coil for continuity.
The ignite coil is correct if there is continuity.
STANDSRD:
With plug cap: 7
∼
12 k
Ω
No plug cap : 3
∼
5 k
Ω
Check the coil output on a ignition coil tester.
Set the tester to ignition test, dial out the
electrodes and observe the spark gap.
GOOD: Continuous spark.
NG: Discontinuous spark
NOTE:
Follow the instructions supplied
with the tester.
A. C. G. INSPECTION
GOOD
NG
1.
OFF
2.
P
3.
EXT
4.
ON.1
5.
ON.2
NO SPARK
↑
↑
SPARK
↑
SPARK
NO SPARK
↑
文件使用
"pdfFactory"
试用版本创建
Downloaded
from
www.ScooterTime.net