Remove the oil seal.
NOTE :
Avoid damaging the inner and outer
surfaces of the slider when
removing the seal and set ring.
BOTTOM CASE INSPECTION
Check the inside sliding surface of the
bottom case for wear or damage.
Measure the bottom case I. D.
SERVICE LIMIT : 31.1
㎜
FRONT FORK ASSEMBLY
Before assembly, wash the parts in
solvent and wipe them off completely.
Insert the seat pipe into the fork tube and
set the oil lock piece on the end of the
seat pipe.
Insert the parts into the fork slider and
tighten the socket bolt with the 6
㎜
Allen
wrench.
NOTE :
Apply locking agent to the socket
bolt.
TORQUE : 1.8— 2.3
㎏
-m
文件使用
"pdfFactory"
试用版本创建
Downloaded
from
www.ScooterTime.net
