![background image](http://html.mh-extra.com/html/cpi/jr-50/jr-50_service-manual_2675042017.webp)
Calculate the piston-to-cylinder clearance.
SERVICE LIMITS : 0.1
㎜
Calculate the taper and out of round.
SERVICE LIMITS:
Out of round: 0.05
㎜
Taper: 0.05
㎜
Measure piston pin bore O. D. at a point 10
㎜
from the bottom.
SERVICE LIMITS: 39.95
㎜
.
51.95
㎜
.
Measure piston pin bore I. D. in two
directions at right angle to each other.
SERVICE LIMITS: 10.05
㎜
12.05
㎜
Measure the piston pin O. D. at the front,
center and rear and in two directions across
from each other.
SERVICE LIMIT: 9.95
㎜
11.95
㎜
Insert each piston ring into cylinder with the
piston and measure the ring end gap in the
cylinder to a point 10
㎜
(
0.04 in
) from the
bottom.
SERVICE LIMITS:
Top / Second: 0.15~0.35
㎜
文件使用
"pdfFactory"
试用版本创建
Downloaded
from
www.ScooterTime.net