![background image](http://html.mh-extra.com/html/cpi/jr-50/jr-50_service-manual_2675042044.webp)
Install the oil seal in the top of the slider
with a fork seal driver.
NOTE :
`
.Apply ATF (Automatic
Transmission Fluid)to the oil seal
and install it with the fork seal
driver.
`
.The fork seal is seated when the
groove in the slider is visible at
the top of the seal.
Install the snap ring into the groove of the
fork bottom case with snap ring pliers.
Fill the forks with good quality
ATF(
Automatic Transmission Florid
).
CAPACITY : 61
cc
Install the fork spring into the fork tube.
NOTE :
Install the fork spring with the
tightly wound coils facing up.
Hold the fork tube in a vice.
Tighten the fork bolt.
TORQUE : 4.0— 5.0
㎏
-m
STEERING STEM REMOVAL
Remove the steering handle.
Remove the speedometer cable & front
brake cable from the fork.
Remove the steering top thread nut.
文件使用
"pdfFactory"
试用版本创建
Downloaded
from
www.ScooterTime.net