CRANKSHAFT INSPECTION
Measure the connecting rod big end side
clearance with a feeler gauge.
SERVICE LIMIT:
0.55
㎜
Measure the connecting rod big end radial
clearance at two different point across from
each other.
SERVICE LIMIT: 0.05
㎜
Place the crankshaft on a stand or V-blocks
and measure the run out using a dial gauge.
Actual bend is 1/2 of total indicator reading.
SERVICE LIMIT:
0.1
㎜
Check the crankshaft bearing play.
If they are noisy or have recessive play,
replace a new one.
文件使用
"pdfFactory"
试用版本创建
Downloaded
from
www.ScooterTime.net
