PISTON REMOVAL
Remove the piston pin clip.
NOTE:
Do not let the clip fall into the
crankcase.
Remove the piston pin.
Remove the piston.
PISTON / PISTON RING INSPECTION
Remove the piston rings.
Clean the grooves for carbon deposit
completely.
NOTE:
Do not damage the piston ring
during removal.
Cylinder block flatness inspections:
SERVICE LIMITS: 0.05
㎜
CYLINDER INSPECTION
Inspect the cylinder bore for wear or
damage.
Measure the cylinder I. D. at three
places; top, middle and bottom of piston
travel and in two directions at right angle
to each other.
SERVICE LIMITS: 40.2
㎜
52.2
㎜
文件使用
"pdfFactory"
试用版本创建
Downloaded
from
www.ScooterTime.net