EN-13
Kendall SCD 700 Series
Section IV - Service and Maintenance
This service manual is intended for use as a guide to technically qualified personnel when evaluating System
malfunctions. It is not to be construed as authorization to perform warranty repairs. Unauthorized service will void
the warranty.
Introduction
The Kendall SCD 700 Series Controller contains no user serviceable parts. User maintenance is covered in the sections
that follow. All other maintenance must be performed by technically qualified service personnel.
Service technicians should be familiar with the operator’s portion of this manual and the operating principles of the
Kendall SCD 700 Series Compression System. If a Controller is to be returned to Covidien for service, a description of
the operating conditions and the fault code displayed should accompany the unit. The fault codes displayed by the
Controller are useful in diagnosing service problems.
This manual describes service procedures to the circuit board level, with an exploded view of the Controller shown
in Figure7. If a component failure on a circuit board is suspected, the unit should be returned for service. It is
recommended that the system be returned with the circuit board in place, as removal of the board(s) involves
additional risk of mechanical damage and damage from electrostatic discharge (ESD).
Warranty and Factory Service
Covidien warrants that your Kendall SCD 700 Series Compression System is free from defective material and
workmanship. Our obligation under this warranty is limited to the repair of Controllers returned to a service center,
transportation charges prepaid, within one year of delivery to the original purchaser. Specifically, we agree to
service and/or adjust any Controller as required if returned for that purpose, and to replace and repair any part
which, upon our examination, is proven to have been defective. This warranty does not apply to the Tubing Set or
the disposable garments, or to equipment damaged through shipping, tampering, negligence, or misuse, including
liquid immersion, autoclaving, ETO sterilization, or the use of unapproved cleaning solutions. To the extent permitted
by applicable law, this limited warranty does not cover, and is intended to exclude, any and all liability on the part of
the Company, whether under this limited warranty or any warranty implied by law, for any indirect or consequential
damages for breach hereof or thereof. Except as expressly provided above in the limited warranty, to the extent
permitted by applicable law, the Company hereby negates and disclaims all express and to the extent permitted by
applicable law, implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Controllers requiring repairs should be sent to a service center. Call one of the service centers listed. Obtain a return
material authorization number and ship the controller, prepaid and insured in the original carton.
CANADA
Covidien Canada
7500 Trans Canada Highway
Pointe-Claire, Qc H9R 5H8
877-664-TYCO (8926)
UNITED STATES
Covidien
5920 Longbow Drive
Boulder CO 80301
1- (800) 255-8522
OUTSIDE U.S. AND CANADA
Covidien
Service Centre
Unit 2 Talisman Business Centre
London Road
Bicester, England OX26 6HR
(+44)1869328065
Service Precautions:
• Always unplug the controller from Mains voltage before servicing the controller.
• Use proper techniques such as grounding straps and pads to protect printed circuit board assemblies from ESD
(Electrostatic Discharge)
