
3
WARNING!
To avoid serious injury, perform maintenance on the vacuum collector;
ONLY AFTER
STOPPING THE MOWER’S ENGINE AND WAITING FOR ALL MOVING PARTS TO COME TO A
COMPLETE STOP.
Set the parking brake. Always remove the ignition key before beginning maintenance.
ALERT! YOUR SAFETY IS INVOLVED!”
Should be followed by the operator to avoid accidents. When
WARNING!
For your own personal safety, ALWAYS mow ACROSS the face of slopes and
NEVER UP and DOWN the face. NEVER attempt to mow excessively steep slopes, and use
caution when turning on any slope.
SAFETY
WARNING!
NEVER
operate the mower unless the discharge guard and either the deflector assembly or
the vacuum collector adapter are fastened securely in place.
WARNING!
Do not work around the mower deck boot or the blower area until you are certain that the mower
blades and the blower impeller have stopped rotating.
Safety Alert Symbol
This Safety Alert Symbol means:
“ATTENTION! BECOME
This symbol is used to call attention to safety precautions that
you see this symbol, carefully read the message that follows
could result in death or serious bodily injury.
The signal words
DANGER, WARNING,
and
CAUTION
are used on the equipment safety signs. These words
are intended to alert the viewer to the existence and the degree of hazard seriousness.
and heed its advice. Failure to comply with safety precautions
Safety Signs
DANGER
!
CAUTION
This signal word indicates a potentially hazardous situation which, if not
avoided, will result in death or serious injury.
This signal word indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
It may also be used to alert against unsafe practices.
It may also be used to alert against unsafe practices.
This signal word indicates a potentially hazardous situation which, if not
avoided, will result in minor or moderate injury.
White letters on
RED
Black letters on
ORANGE
Black letters on
YELLOW
WARNING
!
!
!
2017 (v1.0)
Summary of Contents for CBS2
