Country Clipper CBS2 Operator'S Manual Download Page 2

2

 PROFESSIONAL BAGGING SYSTEM

TABLE OF CONTENTS

 

Safety  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2

 

Safety Alert Symbols - - - - - - - - - - - - - - - - - - - - - - 3

 

Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

 

1-2 Description - - - - - - - - - - - - - - - - - - - - - - - - - 5

II   INSTALLATION FOR USE - - - - - - - - - - - - - - - - - - - - - 5
 

2-1 Preparation Of Mower - - - - - - - - - - - - - - - - - - 5

SECTION                              PAGE

 

1-1 Introduction - - - - - - - - - - - - - - - - - - - - - - - - - 5

 

2-2 Right Frame Mount Plate and

I    INTRODUCTION AND DESCRIPTION - - - - - - - - - - - - 5

 

2-9 Blower Cone Installation - - - - - - - - - - - - - - - - - 10

 

2-11 Upper Frame Assembly Installation - - - - - - - - - 12

 

2-4 PTO Mount Plate Assembly Installation

 

2-3 Rear Mount Support Bracket Installation - - - - - - 7

 

2-8 Cam Assembly Adjustment - - - - - - - - - - - - - - - 10

 

2-10 Lower Mount Tube Installation - - - - - - - - - - - - 11

 

2-6 PTO Handle Installation - - - - - - - - - - - - - - - - - 9

 

      Rear Mount Plate Installation - - - - - - - - - - - - - - 6

 

2-12 Top Assembly To Upper Frame 

 

        Assembly Installation - - - - - - - - - - - - - - - - - - 12

 

2-5 PTO Assembly Installation - - - - - - - - - - - - - - - 9

 

2-7 Belt Installation/Removal and Adjustment - - - - - - 9

 

 

      and Exhaust Diverter Installation - - - - - - - - - - - 8

 

2-13 Hinge Kit Assembly Installation- - - - - - - - - - - - 13

 

Exploded Part Views and Assemblies - - - - - - - - -  19-24

 

2-22 Installation and Removal Of Collection Bags - - - 18

 

3-2 Operation & Tips On Mowing - - - - - - - - - - - - - - 25

 

3-4 Unloading The Collection System - - - - - - - - - - - 25

 

2-20 Impeller Blade Removal/Installation- - - - - - - - - 16

 SECTION                               PAGE

 

2-15 Boot To Mower Deck Installation - - - - - - - - - - - 14

 

2-17 Upper Hose Installation - - - - - - - - - - - - - - - - 15

 

2-18 Lower Hose To Blower Cone Installation- - - - - - 15

 

2-14 Boot Plate Installation- - - - - - - - - - - - - - - - - - 14

 

2-16 Length Of Hose Adjustment - - - - - - - - - - - - - - 15

 

2-19 Lower Hose To Boot Installation - - - - - - - - - - - 15

 

2-21 Weight Kit Installation - - - - - - - - - - - - - - - - - - -17

 
III  OPERATING INSTRUCTIONS - - - - - - - - - - - - - - - - - - 25
 

3-1 General Safety - - - - - - - - - - - - - - - - - - - - - - - 25

 

3-3 Disengagement Of The PTO Assy.  - - - - - - - - - - 25

 

Safety Decals - - - - - - - - - - - - - - - - - - - - - - - - - - 27

 

4-2 Lubrication- - - - - - - - - - - - - - - - - - - - - - - - - - 26

  V   PARTS AND SERVICE - - - - - - - - - - - - - - - - - - - - - - 26

 

Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - 29

  IV  MAINTENANCE - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
 

4-1 Maintenance Checklist - - - - - - - - - - - - - - - -  - - 25

 

5-1 Parts And Service Information - - - - - - - - - - - - - 26

 

Torque Specifications - - - - - - - - - - - - - - - - - - - - - 28

SAFETY

       you.

6.   

Do not attempt to operate your machine when not in the driver’s seat.

7.   

Always shut off blades and engine when emptying the container.

8.   

Stop machine, shut off deck attachment, set parking brake, shut off engine and remove ignition key before 

       removing clogs, removing or replacing hose, boot, blower cone, or performing any maintenance.

2.   

Know the controls and how to stop them quickly. READ THE OPERATOR’S MANUAL!

4.   

Be especially watchful of children and pets entering into the area while operating.

3.   

Do not allow children to operate the machine. Do not allow adults to operate it without proper instruction.

1. 

  Read the operator’s manual carefully and familiarize yourself with the proper use of your attachment. Do not allow

        anyone who is not acquainted with the Safety Instructions to use your attachment.

5.   

Keep your eyes and mind on your machine while mowing or operating your attachment. Don’t let others distract

9.   

Mow across the face of slopes (not more than 10 degrees); never up and down the face.

10. 

It is recommended that the container be emptied when half full while operating on slopes. Start mowing on slopes

12. 

Wear hearing protection.

13. 

Wear eye protection to prevent debris from getting into your eyes.                                                         

       foreign object.

11. 

Inspect your lawn and remove any foreign objects before mowing. Never deliberately run the mower across any 

       when the container is empty.

2017 (v1.0)

Summary of Contents for CBS2































Reviews: