3-1
Installing the holsters and cable
assemblies
3
Before you start
Before installing the holsters and cable assemblies, complete the installation procedure for the CT2025’s
main body, as described in the previous chapter.
Overview of steps
Installing the ChargePoint
®
Charging Station’s holsters involves a few simple steps:
1. Check boxes for correct contents
(see page 3-2)
2. Attach holsters to body assembly
(see page 3-3)
3. Route the RF cables under the top front panel
(see page 3-4)
4. Install cable assembly 2
(see page 3-5)
5. Install filler panel
(see page 3-7)
6. Install cable assembly 1
(see page 3-8)
These steps are detailed in the remainder of this chapter. When you have completed these steps, you will
be ready to install the head assembly, as described in Chapter 4.
