Installing the Bollard Mount
2-13
Step 7 - Remove filler panel and fasten bottom front panel
To remove the filler panel and fasten the bottom front panel:
• Loosen the filler panel’s two
captive security screws using a T25
Torx driver. Then slide the filler
panel upwards to remove.
• Using the supplied allen wrench,
remove the two set screws on the
bottom front panel. These screws
are for shipping only and can be
discarded.
• Slide the bottom front panel down
until flush with the bottom of the
body assembly.
• Attach the bottom power plate’s
ground wire to the tab on the
bottom front panel.
Attach the ground
wire to its tab
Remove
filler
panel
Remove both set screws
(these screws are for
shipping only) on bottom
front panel and slide the
panel all the way down
