Costar Arecont Vision AV08CPD-118 Installation Manual Download Page 50

Page: 50 / 56

ConteraIP Panoramic | Installation Manual

System

Menu

Feature

Description

Firmware Upgrade

Clicks

Choose file

to choose the

firmware upgrade file, and then clicks

Upgrade

Download Log

Records all the status information of the
camera in list format. Downloads the
log file to the computer as a text file.

Note: The log file is protected by a
password. Please contact with Arecont
Vision technical support team.

Reboot the Camera

Restore Factory Default
Settings Except Network
Settings

Restore to Factory Default
Settings

Reboot the Camera:

Reboots the

camera.

Restore Factory Default Settings
Except Network Settings:

Restores all

settings to factory default except the
network settings.

Restore to Factory Default Settings:

Restores all settings to factory default.

Camera information

Displays the information of the
camera: Model Name, Firmware,
MAC Address, and Serial Number.

Get Time from

NTP Server
Computer System

NTP Server:

Synchronizes the

date/time information with defined NTP
server. After setting up the desired

Summary of Contents for Arecont Vision AV08CPD-118

























































Search results

Summary of Contents for Arecont Vision AV08CPD-118

Reviews:

Related manuals for Arecont Vision AV08CPD-118

Brands by name

Popular brands

Costar Arecont Vision AV08CPD-118, Installation Manual

Search results

Summary of Contents for Arecont Vision AV08CPD-118

Reviews:

Related manuals for Arecont Vision AV08CPD-118

Brands by name

Popular brands