Costar Arecont Vision AV08CPD-118 Installation Manual Download Page 12 | Manualshive

Page: 12 / 56

background image

12

ConteraIP Panoramic | Installation Manual

Wall Mount

For a proper wall mount installation, the AV-WMJB-W wall mount and CP-CAP-W wall mount cap are
required (sold separately). A wall mount should only be attached onto hard ceilings including wood,
plastic, metal, and concrete.

1. Using the Mounting template, prepare the mounting provisions for the camera installation.

2. Connect wall mount cap and wall mount.

NOTE: The thread size for Top shield, pendant pole and mount is 1.5” NPT.

3. Attach the wall mount to the wall using the four drywall screws provided or any optional hardware

suitable for the mounting surface.

4. Run the Ethernet cable and outside power cable (if necessary) through the wall mount. Ensure

the gasket is seated properly.

5. Use the supplied security L-key, to loosen the four (4) screws securing the dome cover. Do not

remove screws from the dome cover.

«
...
10
11
12
13
14
...
»

Summary of Contents for Arecont Vision AV08CPD-118

























































Reviews:

No comments

Related manuals for Arecont Vision AV08CPD-118

Brand: Rae Pages: 4

Brand: M-system Pages: 3

Brand: Digital Watchdog Pages: 2

Brand: Basalte Pages: 2

IPC-HFW1230S1-0280B-S5

Brand: Dahua Technology Pages: 17

Brand: unii Pages: 2

Brand: Uniden Pages: 66

Brand: Ecco Pages: 4

Brand: Baldwin Boxall Pages: 7

Terminator ZE-B

Brand: Thermon Pages: 4

Brand: V-TAC Pages: 57

Brand: Intellisystem Pages: 7

Brand: Abus Pages: 181

Brand: M-system Pages: 8

Brand: Hanwha Vision Pages: 14

Brand: Haneco Pages: 2

Brand: Avtech Pages: 24

Brand: Foscam Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands