Costar Arecont Vision AV08CPD-118, Installation Manual

Page: 46 / 56

46
ConteraIP Panoramic | Installation Manual
Select channel Select the desired channel to enable
tampering detection.
Enable Tampering
Detection Enables Tampering Detection function.
Tampering Schedule Configures the alarm schedule by
holding down the mouse button and
clicking the time block to enable the
schedule settings on the selected time.
A light blue color on the time block
indicates that the alarm schedule is
enabled, while a light grey color
indicates that the alarm schedule is
disabled.
Alternatively, you can manually enter
numbers to configure the hours and
minutes from start to end for all
weekdays.
S
: Click “S” to set up a 24-hour
schedule for a particular day.
D
: Click “D” to clear the previous
schedule for a particular day.
Sensitivity Configures the sensitivity level of
Tampering Detection:
High , Medium ,
and Low .
Enable Network Failure Enable network failure detection.
FTP Upload Handler
Enable Trigger Event
Enables and selects a desired trigger
source. The options are
Trigger Alarm
Detection*, Trigger Motion Detection ,
Trigger Tampering Alarm , and Trigger
Scheduled .
*This function is supported depends on
models.