Costar Arecont Vision AV08CPD-118 Installation Manual Download Page 15 | Manualshive

Page: 15 / 56

background image

15

ConteraIP Panoramic | Installation Manual

Pendant Mount

For a proper pendant mount installation, the AV-PMJB-W pendant mount and CP-CAP-W mounting cap
are required (sold separately). A pendant mount should only be attached onto hard ceilings including
wood, plastic, metal, and concrete.

1. Using the Mounting template, prepare the mounting provisions for the camera installation.

2. Connect the cap, pendant pole and mount together.

NOTE: The thread size for Top shield, pendant pole and mount is 1.5” NPT.

3. Attach the pendant mount to the ceiling using the four wood screws provided or any optional

hardware suitable for the mounting surface.

4. Run the Ethernet cable and outside power cable (if necessary) through the Pendant mount.

Ensure the gasket is seated properly.

5. Use the supplied security L-key, to loosen the four (4) screws securing the dome cover. Do not

remove screws from the dome cover.

«
...
13
14
15
16
17
...
»

Summary of Contents for Arecont Vision AV08CPD-118

























































Reviews:

No comments

Related manuals for Arecont Vision AV08CPD-118

Brand: Panasonic Pages: 152

Brand: Tamron Pages: 9

Brand: Hafele Pages: 57

Brand: Qvis Pages: 44

Brand: Panasonic Pages: 42

IQeye Sentinel Series

Brand: Iqinvision Pages: 15

treeMOTION S.light USCA

Brand: TEUFELBERGER Pages: 152

Brand: Response Alarms Pages: 16

Brand: USA Industries Pages: 4

Brand: Uniden Pages: 66

Brand: Silent Witness Pages: 26

Brand: PheeNet Pages: 5

Brand: Conbrov Pages: 36

Brand: Eneo Pages: 90

Brand: Vanderbilt Pages: 3

Brand: Velleman Pages: 20

Brand: jablotron Pages: 2

Brand: Velleman Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands