Cosen SH-710LDM, Instruction Manual

Page: 39 / 127

4 ‐ 5
Control Buttons
1. Power indicator lamp
When the lamp is on, it indicates the power to the machine is turned on.
2. Sawhead swivel FORWARD (counterclockwise) button
When this button is pressed, the sawhead will start swiveling forward (i.e. counterclockwise) until the
button is released or until reaching the maximum “+” mitering capacity. Press the button and release
it when arriving at your desired mitering angle (shown on the HMI touch screen).
This button only works when the following four conditions are met:

When the machine is switched to setting mode “ ” (CE model only)

When the sawhead swivel lock/unlock switch is unlocked

When the saw frame is raised to its upper most position i.e. when the saw frame upper
limit switch is activated

When the vise is open