Cosen SH-710LDM, Instruction Manual, Page: 54 / 127

4 ‐ 20
OPTIONAL ACCESSORIES
Vise Pressure Regulator

This adjustment valve is used to control vise pressure.

Adjust vise pressure based on the material of your
workpiece.

When cutting pipes or soft materials, reduce vise pressure
to prevent exerted pressure from damaging the workpiece
shape or exterior.
Do not adjust vise pressure at any time during cutting.
Vise pressure should never be lower than 8 kg/cm
2
.
Chip conveyor
Chip conveyor is a spiral device to bring chips out
during cutting. When the hydraulic system is turned
on, the user can adjust the conveying speed via the
pressure valve.
As a regular maintenance, remove the chip conveyor
and clean all chip deposits inside.
Vibration Damper
Vibration damper roller is installed on the left saw arm. It
reduces the high frequency noise while cutting large work
piece.
pressure
valve
chip
conveyor
Pressure
gauge
Pressure
adjusting
valve