manualshive.com logo in svg

CORRECT CRAFT Sport 216 2011, Owner'S Manual

Share
Download
CORRECT CRAFT Sport 216 2011 Owner'S Manual Download Page 90

4-10

Section 4

remain on until the water is pumped out. If there is no water in the
bilge, the pumps will turn off. If you want immediate pump action,
turn the switch off and then back on again. The pumps will turn on
periodically to determine if there is water in the bilge. If so, they will
remain on until the water is pumped out. 

The bilge switch must be turned on for this feature to operate. This
will not drain significant power from the battery unless the bilge
pumps are required to run frequently because of a leak or excessive
rainwater. This pumping system should not be relied on over an
extended period of time. Frequently inspect your boat for evidence
of excessive water in the bilge area. Consult your Nautique dealer if
you have any questions. 

NOTICE

Trash in bilge area can damage the bilge pumps. 

Horn 

The “HORN” button is a momentary switch. The horn will operate
whenever the button is pressed and will stop when the button is
released.

Engine Warning Light 

This light indicates low engine oil pressure. The light should come
on when the ignition switch is in the ON position and the engine is
not running. If it stays on or comes on while you are operating the
boat, the light is indicating a problem. Turn the engine OFF. Refer
to the engine manual for additional information.

Heater Switch-Optional 

The optional heater switch operates the fan to deliver heat. The
switch is a four position switch; OFF, LOW, MEDIUM and HIGH.

Summary of Contents for Sport 216 2011





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands