manualshive.com logo in svg

CORRECT CRAFT Sport 216 2011, Owner'S Manual

Share
Download
CORRECT CRAFT Sport 216 2011 Owner'S Manual Download Page 101

4-21

Controls and Indicators

Erasing the User Codes

Make sure the system indicator light is OFF. 

Enter the Master Embedded Code, press and release the 1/2 key
and the 7/8 key at the same time to erase the system user codes.

The keyless ignition will now act as if there are no codes in memory.
Pressing the START key will unlock the system and pressing the
STOP key will lock it without entering a code. Follow the steps in
“Programming The Primary User Code” in this section.

Nautique Digital Cruise

Home Screen

When the ignition is turned to the ON position, the Nautique
Digital Cruise gauge will flash the Nautique corporate logo until the
internal software is booted up, then the display screen will show the
following:

• Set Speed – displays the last speed that was selected as the

desired controlled speed

• ON/OFF – defines if the speed control function is activated

or not

• Depth – displays current water depth from the keel
• Water – displays current lake water temperature
• Actual Speed – displays the actual speed the boat is traveling

Summary of Contents for Sport 216 2011





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands