manualshive.com logo in svg

CORRECT CRAFT Sport 216 2011, Owner'S Manual

Share
Download
CORRECT CRAFT Sport 216 2011 Owner'S Manual Download Page 86

4-6

Section 4

The emergency stop switch can only be effective when it is in good
working condition.

Observe the following:

• DO NOT remove or modify an emergency stop switch

and/or its lanyard.

• The lanyard must be free from obstructions that could

interfere with its operation.

Once a month: Check the emergency stop switch for proper
operation. With the engine running, pull lanyard. If the engine
does not stop, see your Nautique dealer for service of the switch.

Nautique Dash Pod - 
200, 210, 216, 226

Gauges

RPM 3 in 1 Gauge w/Oil & Temp

•

Tachometer

- Registers engine speed in revolutions per

minute (RPM). Use the tachometer to keep the engine
within the proper operating range. Consult the engine
manual for the proper RPM operating range of your engine.

•

Oil Pressure

- Measures the pressure of the engine’s

lubricating oil. Refer to the engine manual for normal
operating pressure. Many serious engine problems are
reflected on oil pressure gauge readings. If the pressure is
lower than the manufacturer’s specification, immediately
turn off the engine. Contact your Nautique dealer to correct
the problem before operating the engine.

Hazard from improper use of the

emergency stop switch can cause death or serious
injury. The emergency stop switch is designed to stop
the boat if the operator is accidentally thrown from the
helm. Attach the lanyard to the operator before starting
the engine.

!

Summary of Contents for Sport 216 2011





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands