manualshive.com logo in svg

CORRECT CRAFT Sport 216 2011, Owner'S Manual

The CORRECT CRAFT Sport 216 2011 Owner's Manual is an essential guide for operating and maintaining this high-performance watercraft. Easily downloadable and free, the comprehensive manual provides detailed instructions and helpful tips to ensure a smooth and enjoyable boating experience. Download your copy now from our website manualshive.com.

Share
Download
background image

2-9

Basic Rules of the Road

The General Prudential Rule

The General Prudential Rule regarding right of way, is that if a
collision appears unavoidable, neither boat has right of way. As
prescribed in the "Rules of the Road," both boats must act to avoid
collision.

Night Running

Boats operating between sunset and sunrise (hours vary by state)
must use navigational lights. Nighttime operation, especially during
bad weather or fog can be dangerous. All "Rules of the Road" apply
at night, but it is best to slow down and stay clear of all boats,
regardless of who has right of way. Protect your night vision by
avoiding bright lights and have a passenger, if possible, help keep
watch for other boats, water hazards and aids to navigation.

Summary of Contents for Sport 216 2011





















































































































































































































































Reviews:

No comments

Related manuals for Sport 216 2011

Sevylor HUDSON KCC360 Owner'S Manual preview
HUDSON KCC360
Brand: Sevylor Pages: 64
Sailfish 290 CC Owner'S Manual preview
290 CC
Brand: Sailfish Pages: 44
J/Boats J-33 Owner'S Manual preview
J-33
Brand: J/Boats Pages: 67
LITEBOAT LiteXP User Manual preview
LiteXP
Brand: LITEBOAT Pages: 28
Hobie Mirage Eclipse 10.5 User Manual preview
Mirage Eclipse 10.5
Brand: Hobie Pages: 20
Incept Stowaway S24K Owner'S Manual preview
Stowaway S24K
Brand: Incept Pages: 8
Sea-doo GTX Limited iS 255 2009 Shop Manual preview
GTX Limited iS 255 2009
Brand: Sea-doo Pages: 555
NW Explorations Discovery Operating Manual preview
Discovery
Brand: NW Explorations Pages: 40
buster L Owner'S Handbook Manual preview
L
Brand: buster Pages: 31
Baja Islander 242 Owner'S Manual preview
Islander 242
Brand: Baja Pages: 83
Mercury Roll Up 899197001 Owner'S Manual preview
Roll Up 899197001
Brand: Mercury Pages: 37
World Cat 295CC 2015 Owner'S Manual preview
295CC 2015
Brand: World Cat Pages: 99
Walker Bay RID 275H Assembly Instructions preview
RID 275H
Brand: Walker Bay Pages: 4
Ocean Kayak TORQUE Owner'S Manual Supplement preview
TORQUE
Brand: Ocean Kayak Pages: 5
Pakboats Puffin Kayak User Information preview
Puffin Kayak
Brand: Pakboats Pages: 7
Nautiraid RAID 325 Instruction Book preview
RAID 325
Brand: Nautiraid Pages: 16
Yamaha WaveRunner GP800R 2001 Owner'S/Operator'S Manual preview
WaveRunner GP800R 2001
Brand: Yamaha Pages: 123
3d XPRO 445 Owner'S Manual preview
XPRO 445
Brand: 3d Pages: 17

Brands by name

Popular brands

Load more brands