manualshive.com logo in svg

CORRECT CRAFT Sport 216 2011, Owner'S Manual

The CORRECT CRAFT Sport 216 2011 Owner's Manual is an essential guide for operating and maintaining this high-performance watercraft. Easily downloadable and free, the comprehensive manual provides detailed instructions and helpful tips to ensure a smooth and enjoyable boating experience. Download your copy now from our website manualshive.com.

Share
Download
background image

6-14

Section 6

NOTICE

Running your boat in shallow water can cause propeller shaft,
strut, propeller and rudder damage and sand and silt to be pulled
into the cooling system. This will cause excessive water pump wear
and can clog the water passages in the engine. Heavy weed growth
in the water can plug the raw water strainer and oil coolers and
cause engine damage. There is a raw water strainer located near
the rear of the engine to strain the water before it goes into the
transmission cooler and then the engine. Check this every time you
use your boat to make sure it is not clogged.

Refer to 

Section 1, Hazardous Conditions, Boating Safety

.

If the engine fails to start or is not operating properly, contact your
Nautique dealer for assistance.

Shifting

Keep the control lever clean and clear of obstructions. Refer to
your engine operator and maintenance manual for shifting
information.

Always pause in NEUTRAL before shifting from reverse to forward
and from forward to reverse.

Steering

Practice steering your boat. Make sure the steering system is
working correctly and is properly maintained. 

Boat movement without making sure your

path is clear can cause death or serious injury. Make
sure there are no swimmers or obstacles in the water
near you.

!

The steering system must be in good

operating condition for safe boating. Frequent
inspection, lubrication and adjustment by your Nautique
dealer is recommended.

!

Summary of Contents for Sport 216 2011





















































































































































































































































Reviews:

No comments

Related manuals for Sport 216 2011

FARRIER MARINE F-22 Sailing Manual preview
F-22
Brand: FARRIER MARINE Pages: 52
Carver 53 Voyager Setup preview
53 Voyager
Brand: Carver Pages: 11
Pro-Line Boats 2007 26 Super Sport Owner'S Manual preview
2007 26 Super Sport
Brand: Pro-Line Boats Pages: 61
YAMARIN Cross 75 Bow Rider User Manual preview
Cross 75 Bow Rider
Brand: YAMARIN Pages: 42
NorthStar 225 RT Brochure preview
225 RT
Brand: NorthStar Pages: 2
YAMARIN 4110 Owner'S Manual preview
4110
Brand: YAMARIN Pages: 21
Hobie PACIFIC 18 Tuning And Maintenance Manual preview
PACIFIC 18
Brand: Hobie Pages: 2
Westport PILOT3 Owner'S Manual preview
PILOT3
Brand: Westport Pages: 11
AB Inflatables ABJET 285 Owner'S Manual preview
ABJET 285
Brand: AB Inflatables Pages: 47
Mercury 200 Optimax Manual preview
200 Optimax
Brand: Mercury Pages: 155
TAKACAT T240L Owner'S Manual preview
T240L
Brand: TAKACAT Pages: 4
Jeanneau Just Breeze 2021 Owners’ Notes preview
Just Breeze 2021
Brand: Jeanneau Pages: 28
Ranger Tugs R-31 CB Owner'S Manual preview
R-31 CB
Brand: Ranger Tugs Pages: 40
Skeeter 200-SX Owner'S Manual preview
200-SX
Brand: Skeeter Pages: 31
Cantiere Del Pardo Grand Soleil 45' Owner'S Manual preview
Grand Soleil 45'
Brand: Cantiere Del Pardo Pages: 121
World Cat 250SF Customer Information preview
250SF
Brand: World Cat Pages: 53
Meridian Yachts 411SB Sedan Owner'S Manual preview
411SB Sedan
Brand: Meridian Yachts Pages: 104
Meridian Yachts 580 Pilothouse Owner'S Manual preview
580 Pilothouse
Brand: Meridian Yachts Pages: 104

Brands by name

Popular brands

Load more brands