manualshive.com logo in svg

CORRECT CRAFT Sport 216 2011, Owner'S Manual

Share
Download
CORRECT CRAFT Sport 216 2011 Owner'S Manual Download Page 131

4-51

Controls and Indicators

Utilities

The Utilities menu option allows you to reset external gauges,
configure wiring and communication settings, and change rudder
angle. It is typically only accessed when the unit is first installed in
order to configure the unit.

System Settings

The System Settings screen displays the current software version
loaded on the unit. You can set individual settings for the available
options, or choose to select 

RESTORE DEFAULTS

for the factory

settings.

The

PREV

and

NEXT

keys allow you to move from field to field.

While the cursor is highlighting a field, the 

SCROLL UP

and

SCROLL DOWN

buttons display available options. Once all the

options have been selected, press Save.

Summary of Contents for Sport 216 2011





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands