manualshive.com logo in svg

CORRECT CRAFT Sport 216 2011, Owner'S Manual

The CORRECT CRAFT Sport 216 2011 Owner's Manual is an essential guide for operating and maintaining this high-performance watercraft. Easily downloadable and free, the comprehensive manual provides detailed instructions and helpful tips to ensure a smooth and enjoyable boating experience. Download your copy now from our website manualshive.com.

Share
Download
background image

4-20

Section 4

Changing the Primary User Code

NOTICE

The current primary code must be used to change to another
primary code.

Make sure the system indicator light is OFF. 

1.  Enter the Primary User Code, then press and release the 1/2

key and the 7/8 key at the same time to put the system in the
code programming mode. The system indicator light will flash.

2.  Enter a code from two to eight characters and press START. For

verification, re-enter the code and press START again. The
system indicator light should stop flashing and stay ON. If the
light does not stop flashing, press STOP and begin again.

To lock the system, re-enter either the new Primary User Code or
the Master Embedded Code and press STOP. 

NOTICE

Changing the Primary User Code will erase the Secondary User
Code.

Programming or Changing the Secondary User Code

NOTICE

The Secondary User Code will only lock or unlock the system and
can not be used for any reprogramming

Make sure the system indicator light is OFF. 

1.  Enter the Primary User Code, press and release the 1/2 key and

the 5/6 key at the same time to put the system in Code
Programming Mode. The system indicator light will flash.

2.  Enter a code from two to eight characters and press START. For

verification, re-enter the code and press START again. The
system indicator light should stop flashing and stay ON. If the
light does not stop flashing, press STOP and begin again.

To lock the system, re-enter any of the three codes and press STOP. 

Summary of Contents for Sport 216 2011





















































































































































































































































Reviews:

No comments

Related manuals for Sport 216 2011

Kadey-Krogen Yachts 5814 Owner'S Manual preview
5814
Brand: Kadey-Krogen Yachts Pages: 449
Topper TOPAZ TRES Rigging Manual preview
TOPAZ TRES
Brand: Topper Pages: 12
Jeanneau Sun Odyssey 379 Owner'S Manual preview
Sun Odyssey 379
Brand: Jeanneau Pages: 154
DeFever Lioness Operation Manual preview
Lioness
Brand: DeFever Pages: 36
X-Yachts x-99 Trim Manual preview
x-99
Brand: X-Yachts Pages: 2
Thaijetboard 2011 Jetkayak User Manual preview
2011 Jetkayak
Brand: Thaijetboard Pages: 32
Dagger Recreational Owner'S Manual preview
Recreational
Brand: Dagger Pages: 16
Sea-doo GTS 5815 Shop Manual preview
GTS 5815
Brand: Sea-doo Pages: 618
J/Boats J/145 Owner'S Manual preview
J/145
Brand: J/Boats Pages: 51
Ocean Kayak Kayak Owner'S Manual preview
Kayak
Brand: Ocean Kayak Pages: 14
Grand S520L User Manual preview
S520L
Brand: Grand Pages: 19
MasterCraft 2013 ProStar 190 Owner'S Manual preview
2013 ProStar 190
Brand: MasterCraft Pages: 184
Lake Powell 48 NAVIGATOR Instruction Manual preview
48 NAVIGATOR
Brand: Lake Powell Pages: 28
World Cat 2011 270TE Owner'S Manual preview
2011 270TE
Brand: World Cat Pages: 93
West Marine Inflatable Boats Owner'S Manual preview
Inflatable Boats
Brand: West Marine Pages: 12
Bavaria Yachts BAVARIA 38 Manual preview
BAVARIA 38
Brand: Bavaria Yachts Pages: 45
Pescador PT200-HF Owner'S Manual preview
PT200-HF
Brand: Pescador Pages: 8
Klepper AERIUS 490 Assembly Manual preview
AERIUS 490
Brand: Klepper Pages: 36

Brands by name

Popular brands

Load more brands