manualshive.com logo in svg

CORRECT CRAFT 216v, Owner'S Manual

Looking for the Owner's Manual for your CORRECT CRAFT 216v? Look no further! Download the free manual from manualshive.com and get all the information you need to make the most of your vessel. Ensure a seamless boating experience with easy-to-access instructions specifically designed for your CORRECT CRAFT 216v.

Share
Download
background image

4-11

Controls and Indicators

Ignition Keyswitch

This keyswitch starts and stops the engine. A built-in protection
system prevents the engine from starting in any gear other than
NEUTRAL. Refer to Shifter/Throttle in this section and consult
the engine operator’s manual for more information.

There is an accessory position on the ignition keyswitch and an
associated terminal on the back of the switch provided to control
power to add on accessories. Even though power to this terminal is
protected by a 20-amp fuse, do not connect any accessory that
draws more than 10 amps. Attaching an accessory to this terminal
should only be done by a qualified technician.

Smart Pod – Limited or Team

Gauges

•

Volts

- Indicates the condition of the engine’s cranking

battery in volts DC. With the ignition switch on and the
engine not running, a reading above 12.5 volts indicates a
fully charged battery. With the engine running at idle, the
gauge should read between 12.5 and 13 volts. With the
engine running at cruising speeds and above, it should show
13 to 14.5 volts. Have your Nautique dealer check the
charging system if the voltmeter reads outside these normal
ranges.

•

Temp

- Indicates the engine coolant temperature. Refer to

the engine manual for normal operating temperature. After
starting the engine, check your temperature gauge for
abnormally high readings. If the reading is outside the
manufacturer’s operating range, immediately turn OFF the
engine. An abnormally high temperature indicates a cooling
system problem. Consult your Nautique dealer when
experiencing a high engine temperature reading. 

The keypad and switch control box will be

damaged beyond repair if the boat's battery cables, the
main switch control box power leads or battery charger
leads are reversed. DO NOT reverse these connections.

CAUTION

V-Drive Sec 4_2010.qxp:Naut Air Sec 4.qxd  7/22/09  1:44 PM  Page 11

Summary of Contents for 216v

























































































































































































































































Reviews:

No comments

Related manuals for 216v

Cruisers Yachts 3372 Express Series Owner'S Manual preview
3372 Express Series
Brand: Cruisers Yachts Pages: 106
Feathercraft K1 Expedition User Manual preview
K1 Expedition
Brand: Feathercraft Pages: 29
Regal 2000 ES Owner'S Manual preview
2000 ES
Brand: Regal Pages: 352
Hallberg-Rassy MONSUN 31 Instructions Manual preview
MONSUN 31
Brand: Hallberg-Rassy Pages: 14
Ockelbo B18 Series Owner'S Manual preview
B18 Series
Brand: Ockelbo Pages: 64
Mercury Sport 240 Owner'S Manual preview
Sport 240
Brand: Mercury Pages: 42
Edey & Duff DOVEKIE Owner'S Manual preview
DOVEKIE
Brand: Edey & Duff Pages: 26
Lifetime emotion KAYAKS STEALTH PRO ANGLER Owner'S Manual preview
emotion KAYAKS STEALTH PRO ANGLER
Brand: Lifetime Pages: 8
Ranger boats Angler Owner'S/Operator'S Manual preview
Angler
Brand: Ranger boats Pages: 80
GALA A Series User Manual preview
A Series
Brand: GALA Pages: 10
Bavaria CRUSER 51 KONDOR 2018 Manual preview
CRUSER 51 KONDOR 2018
Brand: Bavaria Pages: 30
Laser Centre Laser16 Rigging Manual preview
Laser16
Brand: Laser Centre Pages: 17
Mercury Optimax 150 Operation, Maintenance And Installation Manual preview
Optimax 150
Brand: Mercury Pages: 122
Mercury 225 OptiMax Operation, Maintenance & Warranty Manual preview
225 OptiMax
Brand: Mercury Pages: 144
Gumotex RUBY User Manual preview
RUBY
Brand: Gumotex Pages: 48
Rage Black Marlin BL Instruction Manual preview
Black Marlin BL
Brand: Rage Pages: 20
Sailfish 360 CC Owner'S Manual preview
360 CC
Brand: Sailfish Pages: 80
Quicksilver 555 Pilothouse Owner'S Manual preview
555 Pilothouse
Brand: Quicksilver Pages: 53

Brands by name

Popular brands

Load more brands