manualshive.com logo in svg

CORRECT CRAFT 216v, Owner'S Manual

Share
Download
CORRECT CRAFT 216v Owner'S Manual Download Page 231

10-7

Trailer/Trailering

Hitch 

If you do not already have a trailer hitch installed on your vehicle,
go to a reputable hitch company to have the proper size hitch
installed. Always use a hitch rated with the appropriate capacity to
match the trailer and boat’s gross weight.

Wiring 

The trailer requires wiring from your vehicle to the trailer lights.
This can usually be done by the hitch company.

Security 

There are several locking devices available at marine supply stores
to aid in securing your boat whether or not it is attached to your
vehicle.

Storage

Loss of control can cause death or

serious injury. DO NOT attempt to tow more than one
trailer at a time behind your vehicle. Attempting to tow
an additional trailer will adversely affect the trailer
tongue weight.

!

DO NOT use a bumper mounted hitch on

your vehicle. Use a hitch that is attached to the frame of
your vehicle only. DO NOT compromise your equipment,
your safety or the safety of others.

CAUTION

V-Drive Sec 10_2010.qxp:Naut Air Sec 10.qxd  7/22/09  1:50 PM  Page 10-7

Summary of Contents for 216v

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands