manualshive.com logo in svg

CORRECT CRAFT 216v, Owner'S Manual

Looking for the Owner's Manual for your CORRECT CRAFT 216v? Look no further! Download the free manual from manualshive.com and get all the information you need to make the most of your vessel. Ensure a seamless boating experience with easy-to-access instructions specifically designed for your CORRECT CRAFT 216v.

Share
Download
background image

Section 10

10-8

Towing Your Boat 

Read this checklist prior to trailering your boat.

•  Check wheel lug nuts for tightness.
•  Be sure the trailer tongue is securely on the hitch and the

safety chains from the trailer are secured to the vehicle.

•  If your boat is equipped with a trailer bow winch, make sure

the boat is properly located on the trailer and the winch
strap/cable is tight.

•  Be sure a cable or strap secures the bow eye of the boat to

the trailer. Make sure this is tightly secured.

•  Be sure the trailer electrical connector is plugged in. Allow

sufficient slack for cornering. Check brake lights, turn
signals, emergency flasher and running lights.

•  Be sure your gear inside the boat and seat cushions cannot

shift or fly out of the boat during trailering.

•  Be sure the walk-thru door of the windshield is closed and

latched while the boat is being trailered.

•  If you are using any sort of water "ballast" system to add

weight to the boat, be sure it is drained before you put the
boat on the trailer. These systems can adversely affect the
tongue weight of the trailer. Your boat is not designed to
carry exceptionally heavy loads. This can adversely effect the
proper balance of the boat/trailer combination and cause
tire failure and/or loss of control.

•  Make sure the platform bracket pins are in place before

trailering.

•  Remove bilge drain plug(s).

Long Trips

DO NOT use your boat and trailer to haul excessive gear. 

Each time you stop on a long trip, check the following:

•  Make sure the wheel lug nuts are tight and the bearings are

lubricated.

•  Make sure the boat is still positioned snugly against the bow

stops and has not shifted.

V-Drive Sec 10_2010.qxp:Naut Air Sec 10.qxd  7/22/09  1:50 PM  Page 10-8

Summary of Contents for 216v

























































































































































































































































Reviews:

No comments

Related manuals for 216v

PURSUIT OS 285 Owner'S Manual preview
OS 285
Brand: PURSUIT Pages: 136
Outcast OSG Commander Owner'S Manual preview
OSG Commander
Brand: Outcast Pages: 6
Pro-Line Boats 35 Express 2006 Owner'S Manual preview
35 Express 2006
Brand: Pro-Line Boats Pages: 95
Hobie Mirage Tandem Instructions preview
Mirage Tandem
Brand: Hobie Pages: 2
Hobie HOBIE MAUI Owner'S Manual preview
HOBIE MAUI
Brand: Hobie Pages: 6
Hobie Island Instructions Manual preview
Island
Brand: Hobie Pages: 16
Hobie Mirage Adventure Island Owner'S Manual preview
Mirage Adventure Island
Brand: Hobie Pages: 20
Hobie Ketterman TriFoiler Illustrate Parts List preview
Ketterman TriFoiler
Brand: Hobie Pages: 27
Hobie Hobie T2 Owner'S Manual preview
Hobie T2
Brand: Hobie Pages: 44
Old Town Canoe Co. Canoe (French) Manuel Du Propriétaire preview
Canoe
Brand: Old Town Canoe Co. Pages: 14
Woosung KXONE Manual preview
KXONE
Brand: Woosung Pages: 2
Peinert 25 Quick Start Manual preview
25
Brand: Peinert Pages: 4
CORRECT CRAFT 1997 Ski Nautique Owner'S Manual preview
1997 Ski Nautique
Brand: CORRECT CRAFT Pages: 92
SEABOB F5 S Quick Reference preview
F5 S
Brand: SEABOB Pages: 4
Baitstar Xpert Operation Instruction Manual preview
Xpert
Brand: Baitstar Pages: 12
B&G X-35 Performance Manual preview
X-35
Brand: B&G Pages: 7
Polaris INT'L SLX W004699 Parts Manual preview
INT'L SLX W004699
Brand: Polaris Pages: 52
Dehler 31 Owner'S Handbook Manual preview
31
Brand: Dehler Pages: 20

Brands by name

Popular brands

Load more brands