manualshive.com logo in svg

CORRECT CRAFT 216v, Owner'S Manual

Share
Download
CORRECT CRAFT 216v Owner'S Manual Download Page 151

4-75

Controls and Indicators

Boarding Platform

The boarding platform of your boat is a convenient feature to
enhance the watersports experience. There are serious safety
concerns regarding the use of the platform. Correct Craft, Inc. has
placed warning labels at the driver’s position, on the deck at the
rear of the occupant area and on the transom. Refer to Section 1,
Safety, for more information.

To remove the boarding platform, pull the pins 

(A)

located in the

mounting brackets, under the platform and lift the platform
vertically. 

210, 211, 230                                 216V, 226

The boarding platform must be attached when the boat is in use.

CORC025

A

A

CORC226

A spinning propeller or carbon monoxide

can cause death or serious injury. DO NOT use the
boarding platform when the engine is running or for any
other purpose than boarding the boat or preparation for
entering the water.

!

V-Drive Sec 4_2010.qxp:Naut Air Sec 4.qxd  7/22/09  1:45 PM  Page 75

Summary of Contents for 216v

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands