manualshive.com logo in svg

CORRECT CRAFT 216v, Owner'S Manual

Share
Download
CORRECT CRAFT 216v Owner'S Manual Download Page 179

6-1

Section 6

Getting Underway

There are many things to consider to make your boating trip safe
and enjoyable. You are responsible for the safety of all passengers,
the boat and any damage the boat or its wake may cause. Keep
passengers from blocking your view so that you do not run into
other boats, swimmers, water skiers, personal water vehicles or aids
to navigation.

Safety Checklist

Problems found during this inspection should be handled by your
Nautique dealer.

The following checks are essential to safe boating and must be
performed before starting the engine.

• Check the weather report, wind and water conditions.
• Check that required safety equipment and PFDs are 

on-board and in proper operating condition.

• Check that the fire extinguisher is fully charged.
• Be sure the boat is not overloaded.
• Be sure the operator’s visibility is not obstructed. 
• Check that all maintenance has been performed.
• Check the fuel system for leaks and fumes.

Operating the boat if any problem is found

during this inspection can cause death or serious injury.
DO NOT operate the boat if any problem is found during
this inspection.

!

V-Drive Sec 6_2010.qxp:Naut Air Sec 6.qxd  7/22/09  1:46 PM  Page 6-1

Summary of Contents for 216v

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands