manualshive.com logo in svg

CORRECT CRAFT 216v, Owner'S Manual

Share
Download
CORRECT CRAFT 216v Owner'S Manual Download Page 76

Standard and Optional

Equipment

Nautique boats are equipped with only the finest standard and
optional equipment available. Your boat’s equipment will vary,
based on how your boat was built. Many options can only be
installed during the manufacturing of the boat and cannot be retro-
fitted to boats in the field.

Not all of the standard or optional equipment’s use, safety and
maintenance information can be covered in this manual. You will
find most of the standard and optional equipment in this manual
in the section pertaining to its use and function in 

Section 4

. Make

sure you read and understand this manual and all the other
manufacturers’ literature provided in your Skipper’s Kit to
maximize the benefits and uses this equipment has to offer.

If you have any questions regarding the use of any equipment on
your Nautique boat, contact your Nautique dealer.

Section 3

3-20

V-Drive Sec 3_2010.qxp:Naut Air Sec 3.qxd  7/22/09  1:51 PM  Page 20

Summary of Contents for 216v

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands