manualshive.com logo in svg

CORRECT CRAFT 216v, Owner'S Manual

Share
Download
CORRECT CRAFT 216v Owner'S Manual Download Page 140

4-64

Section 4

Waypoint Manager

Waypoints allow you to mark specific locations by latitude and
longitude. Once the waypoints are established, the Waypoint
Manager allows you to associate an icon with them for
identification. You can delete a single waypoint by using the

DELETE

key, or all of them at once with 

DELETE ALL

. Pressing

the 

GO

TO 

WPT

key displays the GPS screen containing the

currently highlighted waypoint.

Waypoint List

– displays a list of the waypoints that have been set.

Use the 

UP

and 

DOWN

keys to highlight the desired waypoint.

Waypoint Icon

– allows you to assign one of four different icons to

any of the waypoints listed.

Lat/Lon

– Displays Latitude and Longitude values for the currently

highlighted waypoint on the list.

V-Drive Sec 4_2010.qxp:Naut Air Sec 4.qxd  7/22/09  1:45 PM  Page 64

Summary of Contents for 216v

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands