Installation and service manual: Postmix tower
Ribbon
7
Cornelius Deutschland GmbH
Document no. TD0000100
Version: 06/11/2017, Index 0
2
Transport and packaging
Choose a suitable packaging when returning the unit itself or one of its components to
Cornelius Deutschland GmbH, e.g. for repairs. In particular, make sure that the unit and any
components are protected from shock/impact, moisture, dirt and electrostatic discharge
(ESD). This will prevent transport damage to the unit and to the components, for which the
manufacturer shall assume no liability.
2.1
Storage
Avoid excessive temperature fluctuations as condensate may form, which in turn may cause
damage to the unit or to the components.
The permissible storage temperature is -10 °C to +50 °C.
The acclimatisation period is 6 hours.
Caution!
Component damage due to freezing liquids
Ambient temperatures that are below freezing will lead to the freezing of
any water or cleaning agent residue remaining inside the unit. This will lead
to damage to internal components.
•
Before shipment, storage or relocation of the unit, the unit is to be
cleaned and the cleaning solution is to be fully drained from the unit.
Caution!
Damage due to improper storage
Dirt or moisture entering a unit, as well as certain weather conditions (e.g.
condensate forming at the unit, sunlight) will cause damage to the unit and
its components.
•
Protect the unit and its components by storing the unit in a clean and
dry place, and by ensuring stable ambient conditions.
•
If possible, store the unit in its original packaging. Unpacked units
must be covered with a dustproof cover. No condensate must form
under the cover.
