Series 100
30
Alternatively a footrest has been supplied (
see fig. 42
)
upon which the operator may carry out all operations
while remaining standing. To use this footrest you must
position it in the correct way:
•
Take out the safety pin which blocks the footrest;
•
Rotate the footrest to a horizontal position;
•
Block the footrest again by positioning the safety pin
again.
DANGER – Never drive with the footrest
unblocked: always verify that the footrest is
blocked and that the safety pin is positioned
correctly.
WARNING – When you open or close the
footrest, be careful with your hands: you may
cut yourself or crush them.
When the machine is in gear, always grasp the
stronghold handle firmly with one hand and use the
other hand simultaneously to activate both drive
levers.
Never release the handle to operate the command
levers with both hands
.
DANGER: When the machine is in gear, the
operator must always maintain the prescribed
driving position.
Never speed when working, rather proceed at a
speed adjusted to your walking speed, in this way you will
maintain a safe control over the commands.
fig. 42 – Driver position with platform
3.5.2. F
ORWARD
G
EAR
To allow the machine to advance one must activate
both drive levers simultaneously by pushing them
forward.
